General
The ED3 Series SkidWeigh Plus systems are fully automatic hydraulic pressure transducer check weighing scales which can be easily integrated into variety of material handling vehicles such as lift trucks, loaders, hydraulic lift tables, truck / trailer lift gates, etc.
Compact design, heavy duty waterproof enclosure, minimum operator input, no coding but with fully automatic calibration procedure makes the system the preferred choice for lift truck dealers aftermarket requirements.
Technical
ED3 Digital indicator
- Measuring range up to 100000 pounds or kg
- Operating temperature -20 C to + 70 C
- Operating voltage from 12 to 55 V DC
- Current consumption <85 mA
- Technology, Micro controller
- Web based wireless reporting interface (Exceptions Reports)
- Real time clock / date
- Check weighing accuracy within +/- 0 to 1% of vehicle lifting capacity
- Automatic pressure transducer visual fault checking capability on LCD display
- Password protection
- Unit serial number stamp
- Two independent weighing channels
- Accumulative load weight total
- Visual overload warning
- Weighing resolution 1,5,10,25,100
- % load weight capability
- Operator ID# input
- USB data storage, optional
- Additional analog input
- Impact detection
- Utilization output notification
- Engine idling output notification
- LCD display 2 x 16 characters, super twist, high contrast
- LCD display operating temperature -20 C to +70 C
- LCD display size 68 x 27 x 11 mm
- Display with LED backlight
- 16 key membrane keypad
- LCD optimum viewing angle +/- 30 degree from operator's line of sight
- Housing, ABS NEMA Type 4X, size 120 x 80 x 55 mm
- Liquid tight straight-thru fitting for electrical cable
- RS-232 interface
- Output relay S.P.D.T
- Optional management events reporting
- Weight approx. 400 g (Without mounting bracket)
Pressure transducer
- Pressure transducer port 1/4"-18 NPT male thread
- Built in pressure snubber
- Proof pressure, 2.5 x range or 6000 PSI
- Environmental: NEMA 4X
- Electrical plug connector, M12 x 1 metal thread
- UL Standard 873
- Shock IEC 60068-2-6
- Power supply 8 to 33 V DC
- Insulation voltage 500 V DC
- Response time <1ms
- Load cycle <100Hz
- Current consumption 4 mA
- Reverse polarity protection
- Over voltage protection
- Short circuit protection
- Housing material, Stainless steel (AISI 303)
- Weight 95 g
- Installation, unrestricted
- EMC Conformity EN 61326-2-3-2006 pressure sensor
- Negligible temperature influence on accuracy
- No media egress when exceeding rapture pressure ( Patented)
- Swiss Made pressure transducer
Solution
Advantages
